Concrete Pole Machine and Concrete Pole Production Line

• Customization: Available
• After-sales Service: Document, Video, Personnel to Solve
• Warranty: 1 Year
• Model NO.: HAIYU-1
• Condition: New
• Customized: Customized
• Application: Industry
• Type: Pipe Production Line
• Size: Customized
• Transport Package: Mold Nude
• Specification: Customized
• Origin: China
• HS Code: 8474809090
• Production Capacity: 2PCS Per Day

Product Description

Concrete Pole Machine and CONCRETE POLE PRODUCTION LINE

(China standard and we can produce it base on customer's requirements)

Length	Top diameter	Bottom diameter
10	190mm	323mm
12	190mm	350mm
15	190mm	390mm

Advantages of Ecuador centrifugal concrete pole steel mold   :
1.Cylinder body: The material blanking according to the customer's order model. The Maximum single length is 12m , And the cylinder body has less welding seams ,which reduces the influence of welding deformation and the error of manual docking. 
2.Running wheel: The material is adopted 30Mn cold roll forming, with good wear resistance.
3.Welding: It is advisable to adopt the section welding process, the welding method is carbon dioxide shielded welding, the gas is mixed gas, and the welding machine adopts Panasonic welding machine, the welding spot is beautiful, and there is no welding slag.
4.Lathe: Introduce CW61180L-16m ultra-long lathe, ∅1000mm×15.4M and below specifications are open for overall processing, and the concentricity of the steel mold is better.
5.Anti-leakage grout: Our company uses a planer for a groove at the joint between the upper mold and the body, and an elastic sealing rubber strip is inserted into the groove. This rubber strip can be reused or replaced at any time. Put an end to the problem of ground joint leakage.


Advantage of Spinning Machine:
1.Through shaft: Material is 40Cr, medium frequency conditioning to HB220-280, high tensile strength, yield strength and hardenability, good toughness.
2.Supporting wheel: material is 40Cr forgings, medium frequency conditioning to HRC35-40, strong impact resistance, good wear resistance;The wheel can be integral retaining edge and movable retaining edge.
3.Tightening sleeve: material is 45# forgings, conditioning to HB220-280, yield strength ≥355Mpa
4.Bearings: Wafangdian bearings - comprehensive economic and technical indicators in the bearing industry in China ranked first, the world ranked 12th.
5.Bearing seat: Material is ZG35.
6.Base:Material is ZG35 or H STEEL ( Q235B).


We also produce square pole machine 













Our Partners